Step-by-Step Instructions For Smoked Jack & Coke Ribs
Step 1: Prep the Ribs
Take your 2 racks of ribs out of the package. You can use baby back ribs or St. Louis-style ribs. Baby backs are smaller and leaner. St. Louis ribs are meatier and fattier. Both work great.
Flip the ribs over so you’re looking at the bone side. There’s a thin, silvery membrane covering the bones. You need to remove this. Slide a butter knife or your finger under the membrane at one end to loosen it, then grab it with a paper towel and pull it off in one piece. If it tears, just keep pulling until it’s all gone. This membrane doesn’t break down during cooking and makes it harder to eat the ribs.
If the ribs are moist from the package, you don’t need a binder. The rub will stick fine. If they’re dry, coat them lightly with yellow mustard or a neutral oil like avocado or vegetable oil. This helps the rub stick.
Season both sides of the ribs generously with your favorite BBQ rub. A brown sugar-based rub works great because the sugar caramelizes and adds to the bark. Make sure you get the rub on the edges and all over both sides.

Let the seasoned ribs sit at room temperature for about 20-30 minutes while you prep the smoker. This helps them cook more evenly.
Step 2: Make the Jack & Coke BBQ Sauce

While the ribs rest, make your Jack & Coke BBQ sauce. In a medium saucepan, combine 1 cup of Coca-Cola, ½ cup of Jack Daniel’s, ½ cup of ketchup, ¼ cup of brown sugar, 2 tablespoons of apple cider vinegar, 1 tablespoon of Worcestershire sauce, 1 tablespoon of honey, 1 teaspoon of smoked paprika, and ½ teaspoon of black pepper.
Whisk everything together over medium heat until the sugar dissolves. Bring the mixture to a simmer, then reduce the heat to medium-low and let it simmer gently for 15-20 minutes. Stir it occasionally to prevent it from sticking to the bottom.
As it simmers, the sauce will reduce and thicken. The Coke and bourbon will cook down and the flavors will concentrate. You’re looking for a thick, glossy sauce that coats the back of a spoon.
Once the sauce is thick, turn off the heat and let it cool completely. Don’t use it hot. Let it sit and cool down while the ribs smoke. By the time you’re ready to wrap, the sauce will be cool and ready to use.
Reserve some sauce for wrapping and some for glazing at the end. You’ll also want extra for serving on the side.
Step 3: Set Up Your Smoker
Preheat your smoker to 275°F. Use apple wood for the smoke. Apple wood is sweet and mild, and it pairs perfectly with the Jack & Coke flavor. It won’t overpower the bourbon or the Coke sweetness.
Let the smoker preheat for about 10-15 minutes so it’s holding steady at 275°F and producing clean smoke—thin and blue, not thick and white.
Fill a spray bottle with Coca-Cola for spritzing. If you want extra bourbon flavor, mix the Coke 50/50 with Jack Daniel’s in the spray bottle.
Step 4: Smoke the Ribs

Place the ribs on the smoker bone-side down. Position them in the center of the smoker grates where the heat is most even.
Close the lid and let them smoke. Don’t open the lid every 15 minutes to check on them. Just let them cook.
After about 45 minutes, open the smoker and spritz the ribs lightly with Coca-Cola (or your Coke/Jack mix). Don’t soak them—just a light mist. Close the lid.
Spritz the ribs every 45 minutes to an hour throughout the smoke. This keeps the surface moist and helps build bark. The sugar in the Coke caramelizes on the ribs and adds color and flavor.
Smoke the ribs for 3 to 4 hours total. You’re looking for a deep, rich mahogany color before you wrap them. The meat should have pulled back from the bones about ¼ to ½ inch. When you pick up the rack from one end, it should bend easily but not break apart.
Step 5: Wrap the Ribs

Once the ribs have that deep color and the bark is set, it’s time to wrap them. Pull them off the smoker and work quickly so they don’t cool down too much.
Lay out a large piece of butcher paper or heavy-duty aluminum foil for each rack. Butcher paper is better because it lets the ribs breathe and keeps the bark from getting soggy, but foil works if you want to speed up the cook.
Place one rack of ribs meat-side up on the paper or foil. Add 2 tablespoons of butter on top of the ribs. Spoon a few spoonfuls of the cooled Jack & Coke BBQ sauce over the ribs. Spread it around so it coats the top.
Wrap the ribs tightly. If you’re using butcher paper, fold it like a present and roll it tight. If you’re using foil, crimp the edges to seal it completely.

Repeat with the second rack.
Step 6: Return to Smoker and Finish
Place the wrapped ribs back on the smoker at 275°F. The wrap creates a steam environment that tenderizes the meat and pushes it to that fall-off-the-bone texture.
Cook the wrapped ribs until they reach about 203°F internal temperature in the thickest part of the meat. Use a probe thermometer to check through the wrap. This usually takes another 1 to 1.5 hours.
At 203°F, the collagen has broken down completely and the ribs are tender. You can also check by feel—when you pick up the wrapped rack from one end, it should bend easily and the meat should crack slightly on the surface.
Step 7: Glaze and Finish

Once the ribs hit 203°F and are tender, carefully unwrap them. Be careful—there will be hot steam and juices inside the wrap.
Brush a fresh layer of Jack & Coke BBQ sauce all over the top of the ribs. Use a silicone brush or a basting brush and coat them generously.
Place the unwrapped ribs back on the smoker grates. Close the lid and let them cook for 15-20 minutes. This allows the sauce to tack up and caramelize. It should get sticky and glossy, not wet and runny.
After 15-20 minutes, brush one more layer of sauce on the ribs if you want. This final glaze layer adds extra flavor and shine.
Step 8: Rest and Serve The Smoked Jack & Coke Ribs
Remove the ribs from the smoker and place them on a cutting board. Let them rest for about 10 minutes before slicing. This rest lets the juices settle back into the meat.
After 10 minutes, use a sharp knife to cut between the bones and separate the ribs into individual pieces.
Arrange the ribs on a serving platter. Serve with extra Jack & Coke BBQ sauce on the side for dipping.
Pour yourself an ice-cold Jack & Coke and enjoy.
